[. . . ] CPSX5600W
USER'S MANUAL
Please read this user's manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG
Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung aufmerksam.
MANUEL D'UTILISATION
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.
MANUALE D'ISTRUZIONI
Vi preghiamo voler leggere attentamente il manuale d'sitruzioni in modo tale da poter comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.
MANUAL DE USUARIO
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.
GEBRUIKSAANWIJZNG
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de uitgebreide mogelijkheden.
BRUKERHÅNDBOK
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.
INSTRUÇÕES DO PROPRIETÁRIO
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do usuário.
TECHNICAL REGULATORY NOTICES
TECHNICAL PORTGÊS
NORSK
NEDERLANDS ESPAÑOL
ITALIANO FRANÇAIS DEUTSCH
ENGLISH
Liquid Crystal Projector
Liquid Crystal Projector
Thank you for purchasing this liquid crystal projector. WARNING · Please read the accompanying manual "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE · The information in this manual is subject to change without notice. [. . . ] buttons.
AUTO OFF
Set AUTO OFF: Set 1~99 minutes with the and buttons. The system automatically enters the standby mode when a signal is not received for the set time. When STOP is selected the system does not enter the standby mode even if no signal is received. SYNC ON G Invalid: Select TURN OFF with the button.
SYNC ON G
· May not be displayed correctly with some input signals when SYNC ON G is valid. In such cases, remove the signal connector so that no signal is received, set SYNC ON G to invalid, and reconnect the signal.
WHISPER
Set / Crear WHISPER Mode: Press the and button. When the WHISPER is selected, the WHISPER mode is active. In the WHISPER mode, acoustic moise level from the unit is reduced, and brightness level on screen is a little lower.
ENGLISH-15
ENGLISH
Options Menu
OPERATIONS (continued)
No Signal Menu
The same adjustments and settings are available as with the Image and Options menus when the MENU button is pressed during display of the "NO INPUT IS DETECTED ON ***" or "SYNC IS OUT OF RANGE ON ***" message while no signal is received.
VOLUME BLANK MIRROR START UP MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER 16
Table 8. No Signal Menu Item
Description
VOLUME
Increase VOLUME · When this function is used, audio input is automatically switched to video. The audio input can be switched by moving the DISK PAD left and right during the display of the volume adjustment bar. The volume adjustment bar is displayed by pressing VOLUME or VOLUME button.
Volume Adjustment: Reduce VOLUME
Select Blank Screen Color: Select the color with the BLANK
and
buttons.
· The image is cleared and the entire screen is displayed in the selected color, when BLANK mode is set with BLANK ON, or when there is no signal for 5 minutes.
MIRROR
Operation Start/Stop: Press the or button. Select Mirror Status: Select the mirror status with the buttons.
and
START UP
Operation Start/Stop: Press the or button. Setup Initial Screen Display: Select the TURN ON with the Clear Initial Screen Display: Select the TURN OFF with the
button. button.
· Note that if TURN OFF is selected the blank screen is displayed in blue when there is no signal.
MENU COLOR LANGUAGE
Select Menu Background Color: Select the color with the buttons.
and
Operation Start/Stop: Press the or button. Select Menu Display Language: Select the language with the buttons.
and
AUTO OFF
SYNC ON G
Operation start/stop: Press the or button. The system automatically enters the standby mode when a signal is not received for the set time. When the STOP is selected the system does not enter the standby mode even if no signal is received. SYNC ON G Invalid: Select the TURN OFF with the button.
· May not be displayed correctly with some input signals when the SYNC ON G is valid. In such cases, remove the signal connector so that no signal is received, set the SYNC ON G to invalid, and reconnect the signal.
WHISPER
Operation Start/Stop: Press the or button. Set / Crear WHISPER Mode: Press the and button. When the WHISPER is selected, the WHISPER mode is active. In the WHISPER mode, acoustic moise level from the unit is reduced, and brightness level on screen is a little lower.
ENGLISH-16
MAINTENANCE
HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
Contact your dealer before replacing the lamp. For the optional lamp, see the item "Optional Parts" of the Table 12. Before replacing the lamp, switch power OFF, remove the power cord from the power outlet, and wait approximately 45 minutes until the lamp has cooled. WARNING · For disposal of used lamp, treat according to the instruction of community authorities. [. . . ] (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code `06H' to the computer.
When a command sent by the projector cannot be understood by the computer
When the command sent by the projector cannot be understood, the error command `15H' is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command `15H' is returned, please send the same command again.
When data sent by the projector cannot be practice
When the command sent by the projector cannot be practiced, the the error code `1cH' +`xxxxH' is returned. [. . . ]